Specification

Engine :Original ROBIN,EH12-2D,  4HP

OHV  Air-cooled  4-stroke

Petrol type:Unleaded gas only

Impact Frequency:680 /min

Forward Speed:14-18 m/min

Impact Force:18kn

Base plate Size:280*330 mm

Impact Depth:550mm

Jumping Height:65 cm

Working Area:300 square meters/h

System of Impacting:Manner of pressurized four-springs

Base plate Materials:Bottom:A3  Iron

Middle:Rubber Mat

Top:45# Iron

Crankcase:115# Alloy Aluminum

Manner of Startup:Recoil

Type of Lubricant:SAE10W-30

Meas(L*W*H):780*410*1050mm

Features:

*          The engine from Japan designed for  rammer made by ROBIN  is well-anti-vibration with unleaded petrol namely 90# gas for fuel.

*         The recoil manner is made for more easy startup under cold weather of 20 degree below zero.

*          The anti-rust fuel tank with automotive cleanse system and two-layers filter can operate longer with lower upkeep.

*          Whole closing down and lubricated with oil impacting system makes the working without malfunction and quick start up on low temperature.

*          Because of its long stroke, even tamping the clay soil, it also can make it perfect.

*          Low center of gravity offers better operation for workers with more efficacy.

*          Soleplate cushion, wave-change pipe and arm absorber forming the three-grades anti-vibration protects the workers from injury during the long time working.

*          Operation handrail with take-up is very easy for transportation and putting it into grooves